Product Details

Scope of application

The transformer can replace the transformer of silicon steel sheet iron core and is widely used in outdoor power distribution system. The large-scale operation of the product into the network can achieve good energy-saving effect and reduce the pollution to the atmosphere. This product is especially suitable for power shortage and load fluctuation in and difficult to carry out and insulation medium is not polluted by air. Therefore, it can operate in wet environment. It is the ideal distribution equipment in the vast distribution network of urban and rural areas.

Model meaning

Structural features

The transformer core is made of amorphous alloy strip, and the no-load loss is about 75% lower than that of the SCB10 transformer.

At low voltage, copper foil coils are used to improve the transformer's ability to withstand short circuits.

Transformer connection group adopts Dyn11 to reduce the influence of harmonics on power grid and improve power supply quality.

Vacuum oil injection can completely eliminate bubbles in the wire network to ensure stable absolute slow performance.

Conditions of use

The altitude does not exceed 1000 meters.

The ambient medium temperature is not higher than +40°C; Maximum average monthly temperature +30°C; Maximum annual average temperature +20°C; Minimum temperature :-25°C.

For indoor use.

Transformers operating under special operating conditions are available according to user requirements.

Main technical parameters

Table 130kVA ~ 2500kVA dry-type amorphous alloy iron core distribution transformer

Note 1: The load loss listed in the table is the value at the reference temperature corresponding to the insulation heat resistance class in brackets (see GB1094.11).

Note 2: When other connection group labels are used, the specific requirements are determined by the manufacturer and the user through consultation.